ABSTRACT
Objectives@#The objective of this study was to investigate the effects of a digital therapeutic exercise platform for pre-frail or frail elderly individuals using augmented reality (AR) technology accessed through glasses. A tablet-based exercise program was utilized for the control group, and a non-inferiority assessment was employed. @*Methods@#The participants included older adult women aged 65 years and older residing in Incheon, South Korea. A digital therapeutic exercise program involving AR glasses or tablet-based exercise was administered twice a week for 12 weeks, with gradually increasing exercise duration. Statistical analysis was conducted using the t-test and Wilcoxon rank sum test for non-inferiority assessment. @*Results@#In theprimary efficacy assessment, regarding the change in lower limb strength, a non-inferior result was observed for the intervention group (mean change, 5.46) relative to the control group (mean change, 4.83), with a mean difference of 0.63 between groups (95% confidence interval, –2.33 to 3.58). Changes in body composition and physical fitness-related variables differed non-significantly between the groups. However, the intervention group demonstrated a significantly greater increase in cardiorespiratory endurance (p < 0.005) and a significantly larger decrease in the frailty index (p < 0.001). @*Conclusions@#An AR-based digital therapeutic program significantly and positively contributed to the improvement of cardiovascular endurance and the reduction of indicators of aging among older adults. These findings underscore the value of digital therapeutics in mitigating the effects of aging.
ABSTRACT
Objectives@#As the Fourth Industrial Revolution advances, there is a growing interest in digital technology. In particular, the use of digital therapeutics (DTx) in healthcare is anticipated to reduce medical expenses. However, analytical research on DTx is still insufficient to fuel momentum for future DTx development. The purpose of this article is to analyze representative cases of different types of DTx from around the world and to propose a classification system. @*Methods@#In this exploratory study examining DTx interaction types and representative cases, we conducted a literature review and selected seven interaction types that were utilized in a large number of cases. Then, we evaluated the specific characteristics of each DTx mechanism by reviewing the relevant literature, analyzing their indications and treatment components. A representative case for each mechanism was provided. @*Results@#Cognitive behavioral therapy, distraction therapy, graded exposure therapy, reminiscence therapy, art therapy, therapeutic exercise, and gamification are the seven categories of DTx interaction types. Illustrative examples of each variety are provided. @*Conclusions@#Efforts from both the government and private sector are crucial for success, as standardization can decrease both the expense and the time required for government-led DTx development. The private sector should partner with medical facilities to stimulate potential demand, carry out clinical research, and produce scholarly evidence.
ABSTRACT
Objectives@#The purpose of this study was to identify any difference in user experience between tablet- and augmented reality (AR) glasses-based tele-exercise programs in elderly women. @*Methods@#Participants in the AR group (n = 14) connected Nreal glasses with smartphones to display a pre-recorded exercise program, while each member of the tablet group (n = 13) participated in the same exercise program using an all-in-one personal computer. The program included sitting or standing on a chair, bare-handed calisthenics, and muscle strengthening using an elastic band. The exercise movements were presented first for the upper and then the lower extremities, and the total exercise time was 40 minutes (5 minutes of warm-up exercises, 30 minutes of main exercises, and 5 minutes of cool-down exercises). To evaluate the user experience, a questionnaire consisting of a 7-point Likert scale was used as a measurement tool. In addition, the Wilcoxon rank-sum test was used to assess differences between the two groups. @*Results@#Of the six user experience scales, attractiveness (p = 0.114), stimulation (p = 0.534), and novelty (p = 0.916) did not differ significantly between the groups. However, efficiency (p = 0.006), perspicuity (p = 0.008), and dependability (p = 0.049) did vary significantly between groups. @*Conclusions@#When developing an AR glasses-based exercise program for the elderly, the efficiency, clarity, and stability of the program must be considered to meet the participants’ needs.
ABSTRACT
Purpose@#Bladder capacity is an important parameter in the diagnosis of lower urinary tract dysfunction. We aimed to determine whether the maximum bladder capacity (MCC) measured during a urodynamic study was affected by involuntary detrusor contraction (IDC) in patients with Lower Urinary Tract Symptoms (LUTS)/Benign Prostatic Hyperplasia (BPH). @*Methods@#Between March 2020 and April 2021, we obtained maximum voided volume (MVV) from a 3-day frequency-volume chart, MCC during filling cystometry, and maximum anesthetic bladder capacity (MABC) during holmium laser enucleation of the prostate under spinal or general anesthesia in 139 men with LUTS/BPH aged >50 years. Patients were divided according to the presence of IDC during filling cystometry. We assumed that the MABC is close to the true value of the MCC, as it is measured under the condition of minimizing neural influence over the bladder. @*Results@#There was no difference in demographic and clinical characteristics between the non-IDC (n=20) and IDC groups (n=119) (mean age, 71.5±7.4) (P>0.05). The non-IDC group had greater bladder volume to feel the first sensation, first desire, and strong desire than the IDC group (P<0.001). In all patients, MABC and MVV were correlated (r=0.41, P<0.001); however, there was no correlation between MCC and MABC (r=0.19, P=0.02). There was no significant difference in MABC between the non-IDC and IDC groups (P=0.19), but MVV and MCC were significantly greater in the non-IDC group (P<0.001). There was no significant difference between MABC and MVV (MABC-MVV, P=0.54; MVV/MABC, P=0.07), but there was a significant difference between MABC and MCC between the non-IDC and IDC groups (MABC-MCC, P<0.001; MCC/MABC, P<0.001). @*Conclusions@#Maximum bladder capacity from a urodynamic study does not represent true bladder capacity because of involuntary contractions.
ABSTRACT
Objectives@#Smart hospitals involve the application of recent information and communications technology (ICT) innovations to medical services; however, the concept of a smart hospital has not been rigorously defined. In this study, we aimed to derive the definition and service types of smart hospitals and investigate cases of each type. @*Methods@#A literature review was conducted regarding the background and technical characteristics of smart hospitals. On this basis, we conducted a focus group interview with experts in hospital information systems, and ultimately derived eight smart hospital service types. @*Results@#Smart hospital services can be classified into the following types: services based on location recognition and tracking technology that measures and monitors the location information of an object based on short-range communication technology; high-speed communication network-based services based on new wireless communication technology; Internet of Things-based services that connect objects embedded with sensors and communication functions to the internet; mobile health services such as mobile phones, tablets, and wearables; artificial intelligence-based services for the diagnosis and prediction of diseases; robot services provided on behalf of humans in various medical fields; extended reality services that apply hyper-realistic immersive technology to medical practice; and telehealth using ICT. @*Conclusions@#Smart hospitals can influence health and medical policies and create new medical value by defining and quantitatively measuring detailed indicators based on data collected from existing hospitals. Simultaneously, appropriate government incentives, consolidated interdisciplinary research, and active participation by industry are required to foster and facilitate smart hospitals.
ABSTRACT
Objectives@#This paper proposes a method for computer-assisted diagnosis of coronavirus disease 2019 (COVID-19) through chest X-ray imaging using a deep learning model without writing a single line of code using the Konstanz Information Miner (KNIME) analytics platform. @*Methods@#We obtained 155 samples of posteroanterior chest X-ray images from COVID-19 open dataset repositories to develop a classification model using a simple convolutional neural network (CNN). All of the images contained diagnostic information for COVID-19 and other diseases. The model would classify whether a patient was infected with COVID-19 or not. Eighty percent of the images were used for model training, and the rest were used for testing. The graphic user interface-based programming in the KNIME enabled class label annotation, data preprocessing, CNN model training and testing, performance evaluation, and so on. @*Results@#1,000 epochs training were performed to test the simple CNN model. The lower and upper bounds of positive predictive value (precision), sensitivity (recall), specificity, and f-measure are 92.3% and 94.4%. Both bounds of the model’s accuracies were equal to 93.5% and 96.6% of the area under the receiver operating characteristic curve for the test set. @*Conclusions@#In this study, a researcher who does not have basic knowledge of python programming successfully performed deep learning analysis of chest x-ray image dataset using the KNIME independently. The KNIME will reduce the time spent and lower the threshold for deep learning research applied to healthcare.
ABSTRACT
OBJECTIVES: This study proposes a method for classifying three types of resting membrane potential signals obtained as images through diagnostic needle electromyography (EMG) using TensorFlow-Slim and Python to implement an artificial-intelligence-based image recognition scheme. METHODS: Waveform images of an abnormal resting membrane potential generated by diagnostic needle EMG were classified into three types—positive sharp waves (PSW), fibrillations (Fibs), and Others—using the TensorFlow-Slim image classification model library. A total of 4,015 raw waveform data instances were reviewed, with 8,576 waveform images subsequently collected for training. Images were learned repeatedly through a convolutional neural network. Each selected waveform image was classified into one of the aforementioned categories according to the learned results. RESULTS: The classification model, Inception v4, was used to divide waveform images into three categories (accuracy = 93.8%, precision = 99.5%, recall = 90.8%). This was done by applying the pretrained Inception v4 model to a fine-tuning method. The image recognition model was created for training using various types of image-based medical data. CONCLUSIONS: The TensorFlow-Slim library can be used to train and recognize image data, such as EMG waveforms, through simple coding rather than by applying TensorFlow. It is expected that a convolutional neural network can be applied to image data such as the waveforms of electrophysiological signals in a body based on this study.
Subject(s)
Artificial Intelligence , Boidae , Classification , Clinical Coding , Electromyography , Membrane Potentials , Methods , NeedlesABSTRACT
PURPOSE: Increased robotic surgery is attended by increased reports of complications, largely due to limited operative view and lack of tactile sense. These kinds of obstacles, which seldom occur in open surgery, are challenging for beginner surgeons. To enhance robotic surgery safety, we created an augmented reality (AR) model of the organs around the thyroid glands, and tested the AR model applicability in robotic thyroidectomy. METHODS: We created AR images of the thyroid gland, common carotid arteries, trachea, and esophagus using preoperative CT images of a thyroid carcinoma patient. For a preliminary test, we overlaid the AR images on a 3-dimensional printed model at five different angles and evaluated its accuracy using Dice similarity coefficient. We then overlaid the AR images on the real-time operative images during robotic thyroidectomy. RESULTS: The Dice similarity coefficients ranged from 0.984 to 0.9908, and the mean of the five different angles was 0.987. During the entire process of robotic thyroidectomy, the AR images were successfully overlaid on the real-time operative images using manual registration. CONCLUSION: We successfully demonstrated the use of AR on the operative field during robotic thyroidectomy. Although there are currently limitations, the use of AR in robotic surgery will become more practical as the technology advances and may contribute to the enhancement of surgical safety.
Subject(s)
Humans , Carotid Artery, Common , Esophagus , Robotic Surgical Procedures , Surgeons , Thyroid Gland , Thyroid Neoplasms , Thyroidectomy , TracheaABSTRACT
OBJECTIVES: Customer discovery (CD) is a method to determine if there are actual customers for a product/service and what they would want before actually developing the product/service. This concept, however, is rather new to health information technology (IT) systems. Therefore, the aim of this paper was to demonstrate how to use the CD method in developing a comprehensive health IT service for patients with knee/leg pain. METHODS: We participated in a 6-week I-Corps program to perform CD, in which we interviewed 55 people in person, by phone, or by video conference within 6 weeks: 4 weeks in the United States and 2 weeks in Korea. The interviewees included orthopedic doctors, physical therapists, physical trainers, physicians, researchers, pharmacists, vendors, and patients. By analyzing the interview data, the aim was to revise our business model accordingly. RESULTS: Using the CD approach enabled us to understand the customer segments and identify value propositions. We concluded that a facilitating tele-rehabilitation system is needed the most and that the most suitable customer segment is early stage arthritis patients. We identified a new design concept for the customer segment. Furthermore, CD is required to identify value propositions in detail. CONCLUSIONS: CD is crucial to determine a more desirable direction in developing health IT systems, and it can be a powerful tool to increase the potential for successful commercialization in the health IT field.
Subject(s)
Humans , Arthritis , Commerce , Entrepreneurship , Health Services Needs and Demand , Korea , Medical Informatics , Methods , Orthopedics , Pharmacists , Physical Therapists , Qualitative Research , Telerehabilitation , United StatesABSTRACT
OBJECTIVES: Augmented reality (AR) technology has become rapidly available and is suitable for various medical applications since it can provide effective visualization of intricate anatomical structures inside the human body. This paper describes the procedure to develop an AR app with Unity3D and Vuforia software development kit and publish it to a smartphone for the localization of critical tissues or organs that cannot be seen easily by the naked eye during surgery. METHODS: In this study, Vuforia version 6.5 integrated with the Unity Editor was installed on a desktop computer and configured to develop the Android AR app for the visualization of internal organs. Three-dimensional segmented human organs were extracted from a computerized tomography file using Seg3D software, and overlaid on a target body surface through the developed app with an artificial marker. RESULTS: To aid beginners in using the AR technology for medical applications, a 3D model of the thyroid and surrounding structures was created from a thyroid cancer patient's DICOM file, and was visualized on the neck of a medical training mannequin through the developed AR app. The individual organs, including the thyroid, trachea, carotid artery, jugular vein, and esophagus were localized by the surgeon's Android smartphone. CONCLUSIONS: Vuforia software can help even researchers, students, or surgeons who do not possess computer vision expertise to easily develop an AR app in a user-friendly manner and use it to visualize and localize critical internal organs without incision. It could allow AR technology to be extensively utilized for various medical applications.